The Hardware Refresh section of the Administration page in Configure stores the global thresholds for hardware refresh. SysTrack uses them to provide insight into systems that need to be refreshed or possibly replaced.
NOTE: In SysTrack On-Premises, the Hardware Refresh section shows only on the Global Master.
Change the Hardware Refresh Thresholds
Go to Configure > SysTrack Settings > Administration, and unlock Configure for editing.
Scroll to the Hardware Refresh section. Anomalies and SysTrack AI Settings can be below it.

Change the thresholds. Each value is a percentage from 0 to 100.
Click Save Changes. If a value is not a number, or an Upper value is not above its Lower value, the message "Invalid Hardware Refresh values, please correct." shows, and the values are not saved.
Hardware Refresh Thresholds
Resource | Threshold | Default (%) |
|---|---|---|
CPU | Upper | 70 |
CPU | Lower | 15 |
Memory | Upper | 70 |
Memory | Lower | 30 |
Disk (Free) | 10 | |
Battery (Capacity) | 70 |
Where SysTrack Uses the Thresholds
Factory Digital Employee Experience (DEX) packs can use these default values. For the Hardware Refresh DEX pack, see the Hardware Refresh Factory User Guide.