---
title: "Wireless Access Point Performance Installation Instructions"
slug: "wireless-access-point-performance-installation-instructions"
updated: 2026-10-06T08:30:09Z
published: 2026-10-06T08:30:09Z
canonical: "documentation.lakesidesoftware.com/wireless-access-point-performance-installation-instructions"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://documentation.lakesidesoftware.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Wireless Access Point Performance Installation Instructions

## Prerequisites

- Minimum Version: Requires SysTrack 11.6 or later.

## Notes

- If you update or reinstall this DEX Pack, you must reassign any Views created below to the SF_WAP Performance Role and reapprove the WAP_PERF Action.

## Installation Steps

To install this DEX Pack, complete the following steps:

1. [Import the Kit](/documentation/docs/wireless-access-point-performance-installation-instructions#import-the-kit).
2. [Enable the WAP_PERF Action](/documentation/docs/wireless-access-point-performance-installation-instructions#enable-the-action).
3. [Create the WAP_PERF_DAILY View](/documentation/docs/wireless-access-point-performance-installation-instructions#create-the-view).
4. [Assign the WAP_PERF_DAILY View to the SF_WAP Performance Role](/documentation/docs/wireless-access-point-performance-installation-instructions#assign-the-view-to-a-role).

### Import the Kit

There are two ways to import the DEX Pack to SysTrack:

- Import the pack directly from the Kits page in SysTrack. See the [Import Online Kits](/documentation/docs/import-online-kits) guide for more information.
- Import a local file downloaded from the [DEX and Kit Downloads](/documentation/docs/dex-packs-dex-and-kit-downloads) page. Click the **Download Kit** link for the pack and follow the [Import Local Kits](/documentation/docs/import-local-kits) guide to finish the import.

### Enable the WAP_PERF Action

1. Verify you have unlocked the tenant next to your username.
2. In **Configure**, click **Automations and Collection Extensions** on the left.
3. Select **Action Governance**, then click the **Pending Approval** tab.
4. Find the **WAP_PERF** Action and select the checkbox next to it.
5. Click **Approve**, then confirm. The action moves to the **Actions** tab and is enabled automatically.

> [!NOTE]
> **NOTE**: In SysTrack Cloud, the user who imported the Kit may not be allowed to approve its actions. If the checkbox is unavailable, ask another user with Action Governance – Management permission to approve the action.

### Create the WAP_PERF_DAILY View

1. Go to **Configure**.
2. Go to **SysTrack Settings** > **Views**.
3. Click the **padlock icon** at the top-right of the screen to allow for editing.
4. Click the **plus icon** to create a new **View**.
5. Enter the following values in the **Settings** section:
  - **View Name: WAP_PERF_DAILY**
  - **Existing Category: Custom**
  - **Expires in: 30 days**
  - **When Expired: Append Data**
  - **Refresh: Daily**, **Inside**, **24x7**
6. In **SQL Generic**, paste the below SQL query:

```sql
SELECT WGUID, GETUTCDATE() AS VWTIME, DOTY, SSID, BSSID, SUM(HOURSVAL) AS HOURSVAL, AVG(SignalStrength) AS SIGNAL_Q, AVG(ReceiveRate) AS REC_RATE, AVG(TransmitRate) AS TRANS_RATE FROM ( SELECT T0.WGUID, DATEADD(D,DATEDIFF(D,0,T0.WTIME),0) AS DOTY, POWER(2, DATEPART(HH,T0.WTIME)) AS HOURSVAL, S1.STRVALUE AS SSID, S0.STRVALUE AS BSSID, AVG(T0.SignalStrength) AS SignalStrength, AVG(T0.ReceiveRate) AS ReceiveRate, AVG(T0.TransmitRate) AS TransmitRate FROM DYNC_WAP_PERF AS T0 INNER JOIN SASTR_DYN AS S0 ON T0.BSSID = S0.STRINGID INNER JOIN SASTR_DYN AS S1 ON T0.SSID = S1.STRINGID WHERE T0.WTYPE = 0 AND DATEDIFF(D, T0.WTIME, <LASTREFRESHTIME>) <= 0 AND DATEDIFF(D, T0.WTIME, GETUTCDATE()) > 0 GROUP BY T0.WGUID, DATEADD(D,DATEDIFF(D,0,T0.WTIME),0), POWER(2, DATEPART(HH,T0.WTIME)), S1.STRVALUE, S0.STRVALUE ) AS T0 GROUP BY WGUID, DOTY, SSID, BSSID
```

1. Click **Test SQL** to validate the query. The top of the screen will display **Success** if the SQL code is valid.
2. Click **Create View**. It may take a few moments to see the new view in the view list.

### Assign the WAP_PERF_DAILY View to the SF_WAP Performance Role

1. In Configure, go to **System Configuration** > **Roles**.
2. Select **SF_WAP Performance** from the drop down list.
3. At the bottom of the screen, select the **Views** tab.
4. Scroll to **WAP_PERF_DAILY** and select it.
5. Click **Save Changes**.