---
title: "BIOS Information Installation Instructions"
slug: "bios-information-installation-instructions"
updated: 2026-10-01T13:58:02Z
published: 2026-10-01T13:58:02Z
canonical: "documentation.lakesidesoftware.com/bios-information-installation-instructions"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://documentation.lakesidesoftware.com/llms.txt
> Use this file to discover all available pages before exploring further.

# BIOS Information Installation Instructions

## Prerequisites

- Minimum Version: Requires SysTrack 10.1.0.1 or later.

## Notes

- After this DEX Pack is installed, it may take up to 24 hours for data to appear.
- If you update or reinstall this DEX Pack, you must reassign any Views created below to the SF_BIOS Information Role.

## Installation Steps

To install this DEX Pack, complete the following steps:

1. [Import the Kit](/documentation/docs/bios-information-installation-instructions#import-kit).
2. [Assign the BIOS Information Role to Relevant Configurations](/documentation/docs/bios-information-installation-instructions#bios-information-role).

### Import the Kit

There are two ways to import the DEX Pack to SysTrack:

- Import the pack directly from the Kits page in SysTrack. See the [Import Online Kits](/documentation/docs/import-online-kits) guide for more information.
- Import a local file downloaded from the [DEX and Kit Downloads](/documentation/docs/dex-packs-dex-and-kit-downloads) page. Click the **Download Kit** link for the pack and follow the [Import Local Kits](/documentation/docs/import-local-kits) guide to finish the import.

### Assign the BIOS Information Role to Relevant Configurations

Lenovo model names will not display correctly unless you assign the SF_BIOS Information Role.

If your enterprise does not use any Lenovo systems, you can skip this step.

To assign this Role to the relevant Configurations:

1. Navigate to **Configure** > **Configurations**.
2. Click the **padlock icon** in the upper-right to enable editing.
3. Use the drop-down at the top to select a relevant Configuration, or create a new Configuration.
4. Assign **SF_BIOS Information Role** to the Configuration by dragging it from **Available Roles** to **Assigned Roles**.
5. Click **Save Changes** at the top-right.
6. Repeat this process for any other relevant Configurations.