---
title: "Software Asset Optimization Installation Instructions"
slug: "software-asset-optimization-installation-instructions"
updated: 2026-10-06T08:30:09Z
published: 2026-10-06T08:30:09Z
canonical: "documentation.lakesidesoftware.com/software-asset-optimization-installation-instructions"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://documentation.lakesidesoftware.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Software Asset Optimization Installation Instructions

## Prerequisites

- Minimum Version: Requires SysTrack 10.1 or later.

## Notes

- It may take up to 24 hours for data to appear after this DEX Pack is installed.

## Installation Steps

To install this DEX Pack, complete the following steps:

1. [Import the Kit](/documentation/docs/software-asset-optimization-installation-instructions#import-kit).
2. [Assign the Software Asset Optimization Role to Relevant Configurations](/documentation/docs/software-asset-optimization-installation-instructions#assign-the-software-asset-optimization-role-to-relevant-configurations).

### Import the Kit

There are two ways to import the DEX Pack to SysTrack:

- Import the pack directly from the Kits page in SysTrack. See the [Import Online Kits](/documentation/docs/import-online-kits) guide for more information.
- Import a local file downloaded from the [DEX and Kit Downloads](/documentation/docs/dex-packs-dex-and-kit-downloads) page. Click the **Download Kit** link for the pack and follow the [Import Local Kits](/documentation/docs/import-local-kits) guide to finish the import.

### Assign the Software Asset Optimization Role to Relevant Configurations

You are required to assign the SF_Software Asset Optimization Role to the relevant Configurations.

1. Go to **Configure** > **Configurations**.
2. Click the **padlock icon** in the upper-right to enable editing.
3. Use the drop-down at the top to select a relevant Configuration, or create a new Configuration.
4. Assign **SF_Software Asset Optimization** Role to the Configuration by dragging it from **Available Roles** to **Assigned Roles**.
5. Click **Save Changes**.

> [!NOTE]
> **NOTE**: Repeat the process for other relevant Configurations.