--- title: "Settings" slug: "settings" description: "Set the SysTrack color theme and the default configuration for new systems, and turn on Auto Remove Non-Connecting Systems." status: "update" updated: 2026-11-10T13:02:20Z published: 2026-11-10T13:02:20Z canonical: "documentation.lakesidesoftware.com/settings" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.lakesidesoftware.com/llms.txt > Use this file to discover all available pages before exploring further. # Settings On the **Administration** page in Configure, the top section is **Settings**. It sets the color theme of SysTrack and the default configuration for new systems. It also has the setting for [automatically removing non-connecting systems](/documentation/docs/settings#auto-remove-in-configure). Access to the **Administration** page depends on your user privileges. > [!NOTE] > **NOTE**: In SysTrack On-Premises, **Settings** also has **Host name** and **Use FQDN for systems added to the tree**, and **Auto Remove Non-Connecting Systems** appears only on the Global Master. See [Settings in Administration](/documentation/docs/onpremises-configure-differences-from-cloud#settings-in-administration) in Differences in Configure for On-Premises. Follow these steps to select a display color theme for SysTrack and set a default configuration for new systems: 1. Go to **Configure** > **SysTrack Settings** > **Administration**, and [unlock Configure for editing](/documentation/docs/unlock-for-editing). 2. In the **Theme** field, select one of the following: - **Dark** (default) - **Light** 3. In the **Set default configuration for new systems** field, select the configuration to apply to new systems. The default is the **Default** configuration. You can set Configurations on the [Configurations](/documentation/docs/create-a-new-configuration) page. 4. Click **Save Changes**. The selected color theme is also applied to the SysTrack launch homepage. ## Auto Remove in Configure In large environments where systems are often re-imaged or upgraded, finding and removing the old systems from SysTrack can take a long time. If you use the auto remove setting, it will reclaim the license for a system when it has not connected from the environment within the set period of time. **Auto Remove Non-Connecting Systems** is disabled by default. 1. Go to **Configure** > **SysTrack Settings** > **Administration**, and [unlock Configure for editing](/documentation/docs/unlock-for-editing). 2. In **Settings**, find **Auto Remove Non-Connecting Systems**. **Disabled** is the default. ![Auto Remove Non-Connecting Systems Disabled Remove after 30 days](https://cdn.document360.io/87d11426-6b1f-4b19-b593-b71e55a81af3/Images/Documentation/auto_remove_disabled.png?sv=2026-02-06&spr=https&st=2026-11-14T02%3A46%3A57Z&se=2026-11-14T03%3A46%3A57Z&sr=c&sp=r&sig=%2BYNxrFVpg8UebpYLFbG8S2KTe8gqm8%2BozNOvyTqW71Q%3D) > [!CAUTION] > **WARNING**: SysTrack removes each system that has not connected for the set number of days, and its data. This cannot be undone. 3. In **Auto Remove Non-Connecting Systems**, select **Enabled**. ![Auto Remove Non-Connecting Systems Enabled Remove after 30 days](https://cdn.document360.io/87d11426-6b1f-4b19-b593-b71e55a81af3/Images/Documentation/auto_remove.png?sv=2026-02-06&spr=https&st=2026-11-14T02%3A46%3A57Z&se=2026-11-14T03%3A46%3A57Z&sr=c&sp=r&sig=%2BYNxrFVpg8UebpYLFbG8S2KTe8gqm8%2BozNOvyTqW71Q%3D) 4. In **Remove after**, enter the number of days. The default is 30 days, and the minimum is 1 day. 5. Click **Save Changes**. The check runs once a day. It removes each system that has not connected for the number of days in **Remove after**. The agent is not uninstalled. If the system is reconnected, it will connect and continue condensing data.