Prerequisites
Minimum Version: Requires SysTrack 11.0 or later.
Notes
The pack does not require enabling actions, creating views, assigning them to roles, and assigning roles to configurations. You only need to import the DEX Pack and the newest Factory Sensors Kit, because it contains sensors that feed the dashboard.
The dashboard fills as devices report. A device appears in Not Measured until it returns its first sensor result, and the history chart requires 30 days to show a full window.
This pack is read-only. It does not change anything on a device or start remediation.
Installation Steps
To install this DEX Pack, complete the following steps:
Import the Kits
To use this DEX Pack, the corresponding Kit must be imported to SysTrack. Additionally, you must also import the Factory Sensors Kit for the DEX Pack to work properly.
There are two ways to import the DEX Pack to SysTrack:
Import the pack directly from the Kits page in SysTrack. See the Import Online Kits guide for more information.
Import a local file downloaded from the DEX and Kit Downloads page. Click the Download Kit link for the pack and follow the Import Local Kits guide to finish the import.
Follow the same steps to import the Factory Sensors. Be sure to use the ZIP file for the Factory Sensors Kit.
If you have already imported the DEX Pack and the Factory Sensors directly from the Kits page, the Import Kit step is complete. You may move on to the Verify the Installation step.
Verify the Installation
Open Dashboards in the left navigation bar and filter by the DEX Pack category. Secure Boot PCA 2011 Cert Transition should appear in the list.
Open the dashboard. The group selector at the top includes All Systems, and the chart shows the devices in that group.
On the day of installation, every device appears in Not Measured. This is expected because none of the pack sensors have reported yet. The dashboard fills over the following sensor evaluation cycles.